Get the best out of the Pylontech Lithium Batteries with Voltasol Hybrid Inverters

We  are pleased to announce that our Hybrid inverters (on grid/off grid) with energy storage, are ready to support the battery management system (BMS) of Pylontech US2000B Plus lithium batteries. The BMS is implemented via the RS485 card. There is an intelligent port on every hybrid inverter with adequare space to install the RS485 interface. Using the RJ45 cable between the inverter and Pylontech batteries, you have full access to the battery management system and optimised charging setting.

Step by step interface

STEP 1.

Install the RS485 communication card in to the designated Intelligent Port of the inverter.

STEP 2.

Connect the RJ45 cable from the RS485 card to the Pylontech Lithium battery stack

STEP 3.

Switch on the Pylontech and Inverter. Simple it works !

Family of Voltason Hybrid Inverters from 3kW  to 10kW

There is a hybrid inverter that can charge any size of lithium battery stack, from 3kW up to 10kW Voltasol communicates flawlessly with the built-in BMS battery management system, which can manage and monitor cells information including voltage, current and temperature.

From a small installation with 2kWh energy storage up to several racks of Pylon batteries we cover all the power needs

Voltason Inverter/Chargers – 48V Battery compatible.

• 3kW Single Phase
• 5kW Single Phase with parallel Function
• 5.5kW Single Phase without parallel Function
• 10kW Three Phase with parallel function

For more information follow our link here

Voltacon’s range of solar inverters with energy management. 3kW | 5kW |10kW